# Nanometers to Feet & Inches Conversion

Enter the length in nanometers below to get the value converted to feet.

**Results in Feet:**

1 nm = 0' 0"

## How to Convert Nanometers to Feet

To convert a nanometer measurement to a foot measurement, divide the length by the conversion ratio.

Since one foot is equal to 304,800,000 nanometers, you can use this simple formula to convert:

The length in feet is equal to the nanometers divided by 304,800,000.

**For example,**here's how to convert 500,000,000 nanometers to feet using the formula above.

Our inch fraction calculator can add nanometers and feet together, and it also automatically converts the results to US customary, imperial, and SI metric values.

Nanometers and feet are both units used to measure length. Keep reading to learn more about each unit of measure.

## Nanometers

One nanometer is equal to one-billionth (1/1,000,000,000) of a meter, which is defined as the distance light travels in a vacuum in a ^{1}/_{299,792,458} second time interval.

The nanometer, or nanometre, is a multiple of the meter, which is the SI base unit for length. In the metric system, "nano" is the prefix for 10^{-9}. Nanometers can be abbreviated as *nm*; for example, 1 nanometer can be written as 1 nm.

The nanometer is an extremely small unit of length measurement, often used to measure things that are very small, such as the transistors and electrical pathways in computer processors and nanotechnology.

## Feet

The foot is a unit of linear length measure equal to 12 inches or ^{1}/_{3} of a yard.
Because the international yard is legally defined to be equal to exactly 0.9144 meters, one foot is equal to 0.3048 meters.^{[1]}

The foot is a US customary and imperial unit of length. Feet can be abbreviated as *ft*; for example, 1 foot can be written as 1 ft.

Feet can also be denoted using the *′* symbol, otherwise known as a prime, though a single-quote (') is often used instead of the prime symbol for convenience.
Using the prime symbol, *1 ft* can be written as 1′.

The foot is most commonly measured using either a standard 12" ruler or a tape measure, though there are many other measuring devices available. Feet are sometimes referred to as linear feet, which are simply the measurement of length in feet.

You might be interested in our feet and inches calculator, which can add feet with inches, centimeters, or meters.

We recommend using a ruler or tape measure for measuring length, which can be found at a local retailer or home center. Rulers are available in imperial, metric, or combination with both values, so make sure you get the correct type for your needs.

Need a ruler? Try our free downloadable and printable rulers, which include both imperial and metric measurements.

## Nanometer to Foot Conversion Table

Nanometers | Feet |
---|---|

1 nm | 0.0000000032808' |

2 nm | 0.0000000065617' |

3 nm | 0.0000000098425' |

4 nm | 0.000000013123' |

5 nm | 0.000000016404' |

6 nm | 0.000000019685' |

7 nm | 0.000000022966' |

8 nm | 0.000000026247' |

9 nm | 0.000000029528' |

10 nm | 0.000000032808' |

100 nm | 0.00000032808' |

1,000 nm | 0.0000032808' |

10,000 nm | 0.000032808' |

100,000 nm | 0.000328' |

1,000,000 nm | 0.003281' |

10,000,000 nm | 0.032808' |

100,000,000 nm | 0.328084' |

1,000,000,000 nm | 3.2808' |

## References

- National Institute of Standards and Technology, U.S. Survey Foot: Revised Unit Conversion Factors, https://www.nist.gov/pml/us-surveyfoot/revised-unit-conversion-factors

## More Nanometer & Foot Conversions

- nanometers to miles
- nanometers to yards
- nanometers to inches
- nanometers to kilometers
- nanometers to meters
- nanometers to centimeters
- nanometers to millimeters
- nanometers to micrometers
- miles to feet
- yards to feet
- inches to feet
- kilometers to feet
- meters to feet
- centimeters to feet
- millimeters to feet
- micrometers to feet