kPa to kg/m² Converter
Enter the pressure in kilopascals below to convert it to kilograms per square meter.
Result: Kilograms per Square Meter
Do you want to convert kilograms per square meter to kilopascals?
On this page:
Joe is the creator of Inch Calculator and has over 20 years of experience in engineering and construction. He holds several degrees and certifications.
How to Convert Kilopascals to Kilograms per Square Meter
To convert a measurement in kilopascals to a measurement in kilograms per square meter, multiply the pressure by the following conversion ratio: 101.971621 kilograms per square meter/kilopascal.
Since one kilopascal is equal to 101.971621 kilograms per square meter, you can use this simple formula to convert:
kilograms per square meter = kilopascals × 101.971621
The pressure in kilograms per square meter is equal to the pressure in kilopascals multiplied by 101.971621.
For example, here's how to convert 5 kilopascals to kilograms per square meter using the formula above.
kilograms per square meter = (5 kPa × 101.971621) = 509.858106 kg/m²
Kilopascals and kilograms per square meter are both units used to measure pressure. Keep reading to learn more about each unit of measure.
What Is a Kilopascal?
The kilopascal is a multiple of the pascal, which is the SI derived unit for pressure. In the metric system, "kilo" is the prefix for thousands, or 103. Kilopascals can be abbreviated as kPa; for example, 1 kilopascal can be written as 1 kPa.
Learn more about kilopascals.
What Are Kilograms per Square Meter?
One kilogram per square meter is the pressure of equal to one kilogram-force per square meter.
The kilogram per square meter is a non-SI metric unit for pressure. A kilogram per square meter is sometimes also referred to as a kilogram per square metre or kilogram-force per meter square. Kilograms per square meter can be abbreviated as kg/m², and are also sometimes abbreviated as kgf/cm². For example, 1 kilogram per square meter can be written as 1 kg/m² or 1 kgf/cm².
In the expressions of units, the slash, or solidus (/), is used to express a change in one or more units relative to a change in one or more other units.[1] For example, kg/m² is expressing a change in weight relative to a change in area.
The unit is deprecated and not permitted for use with SI units.
Kilograms per square meter can be expressed using the formula:
1 kgf/m2 = 1 kgf / m2
Pressure in kilograms per square meter are equal to the kilogram-force divided by the area in square meters.
Learn more about kilograms per square meter.
Kilopascal to Kilogram per Square Meter Conversion Table
| Kilopascals | Kilograms Per Square Meter |
|---|---|
| 1 kPa | 101.97 kg/m² |
| 2 kPa | 203.94 kg/m² |
| 3 kPa | 305.91 kg/m² |
| 4 kPa | 407.89 kg/m² |
| 5 kPa | 509.86 kg/m² |
| 6 kPa | 611.83 kg/m² |
| 7 kPa | 713.8 kg/m² |
| 8 kPa | 815.77 kg/m² |
| 9 kPa | 917.74 kg/m² |
| 10 kPa | 1,020 kg/m² |
| 11 kPa | 1,122 kg/m² |
| 12 kPa | 1,224 kg/m² |
| 13 kPa | 1,326 kg/m² |
| 14 kPa | 1,428 kg/m² |
| 15 kPa | 1,530 kg/m² |
| 16 kPa | 1,632 kg/m² |
| 17 kPa | 1,734 kg/m² |
| 18 kPa | 1,835 kg/m² |
| 19 kPa | 1,937 kg/m² |
| 20 kPa | 2,039 kg/m² |
| 21 kPa | 2,141 kg/m² |
| 22 kPa | 2,243 kg/m² |
| 23 kPa | 2,345 kg/m² |
| 24 kPa | 2,447 kg/m² |
| 25 kPa | 2,549 kg/m² |
| 26 kPa | 2,651 kg/m² |
| 27 kPa | 2,753 kg/m² |
| 28 kPa | 2,855 kg/m² |
| 29 kPa | 2,957 kg/m² |
| 30 kPa | 3,059 kg/m² |
| 31 kPa | 3,161 kg/m² |
| 32 kPa | 3,263 kg/m² |
| 33 kPa | 3,365 kg/m² |
| 34 kPa | 3,467 kg/m² |
| 35 kPa | 3,569 kg/m² |
| 36 kPa | 3,671 kg/m² |
| 37 kPa | 3,773 kg/m² |
| 38 kPa | 3,875 kg/m² |
| 39 kPa | 3,977 kg/m² |
| 40 kPa | 4,079 kg/m² |
References
- National Institute of Standards and Technology, NIST Guide to the SI, Chapter 6: Rules and Style Conventions for Printing and Using Units, https://www.nist.gov/pml/special-publication-811/nist-guide-si-chapter-6-rules-and-style-conventions-printing-and-using