# 19/32" to mm - SAE to Metric Calculator

Do you need to convert 19/32 inch to mm?

19/32 inch = 15.08125 mm

If you're curious how we got that answer, here's the 19/32" to mm formula:

19 ÷ 32 × 25.4 = 15.08125 mm

0.59375 × 25.4 = 15.08125 mm

To convert 19/32 inch to mm, divide 19 by 32 to convert the fraction to a decimal. Then, multiply that by 25.4 since there are 25.4 millimeters in one inch.

That's the formula that our calculator uses to find that 19/32 inch to millimeters is 15.08125 mm.

Convert a measurement from SAE to metric or metric to standard SAE using the calculator below. Learn more about SAE and metric measurements, and refer to the conversion chart below.

## Metric Result:

### Nearest Standard Measurement

### Exact Measurement

## On this page:

## How to Convert SAE to Metric

SAE, or standard, and metric sockets, wrenches, and fasteners are both commonly used, but the difference between them is significant. Before we explain how to convert SAE to metric, it’s important to understand what these terms actually mean.

SAE stands for Society of Automotive Engineers,^{[1]} and is based on standard imperial and U.S. customary measurement systems. It uses measurements in inch fractions and is most commonly used in the United States.

The metric system was developed more recently and is commonly used worldwide. Metric sockets and screws are primarily measured in millimeters.

You can use the chart below to convert an SAE size to metric. You can also do the conversion by hand in a few easy steps as follows:

### Step One: Convert the Inch Fraction to an Inch Decimal

The first step is to convert the inch fraction to a decimal. You can do this by treating the fraction as a division problem and solving it.

For instance:

1/4″ = 1 ÷ 4 = 0.25″

### Step Two: Convert the Inch Decimal to Millimeters

The next step is to multiply the inch decimal by 25.4 to convert it to millimeters. This is the key step for converting SAE to metric.

0.25″ × 25.4 = 6.35 mm

## SAE to Metric Conversion Chart

The chart below shows SAE measurements (in fractions) and the equivalent metric and inch decimal measurements for common socket, wrench, and screw sizes.

Standard (SAE) |
Metric (mm) |
Inches (decimal) |

1/32″ | 0.7938 mm | 0.0313″ |

1 mm | 0.0394″ | |

1/16″ | 1.5875 mm | 0.0625″ |

5/64″ | 1.98438 mm | 0.0781″ |

2 mm | 0.0787″ | |

3/32″ | 2.3813 mm | 0.0938″ |

7/64″ | 2.7781 mm | 0.1094″ |

3 mm | 0.1181″ | |

1/8″ | 3.175 mm | 0.125″ |

5/32″ | 3.9688 mm | 0.156″ |

4 mm | 0.157″ | |

4.5 mm | 0.177″ | |

3/16″ | 4.7625 mm | 0.188″ |

5 mm | 0.197″ | |

5.5 mm | 0.216″ | |

7/32″ | 5.5563 mm | 0.219″ |

6 mm | 0.236″ | |

1/4″ | 6.35 mm | 0.25″ |

6.5 mm | 0.256″ | |

7 mm | 0.276″ | |

9/32″ | 7.1438 mm | 0.281″ |

5/16″ | 7.9375 mm | 0.313″ |

8 mm | 0.315″ | |

11/32″ | 8.7313 mm | 0.344″ |

9 mm | 0.354″ | |

3/8″ | 9.525 mm | 0.375″ |

10 mm | 0.394″ | |

13/32″ | 10.3188 mm | 0.406″ |

11 mm | 0.433″ | |

7/16″ | 11.1125 mm | 0.438″ |

15/32″ | 11.9063 mm | 0.469″ |

12 mm | 0.472″ | |

1/2″ | 12.7 mm | 0.5″ |

13 mm | 0.512″ | |

17/32″ | 13.4938 mm | 0.531″ |

14 mm | 0.551″ | |

9/16″ | 14.2875 mm | 0.563″ |

15 mm | 0.591″ | |

19/32″ | 15.0813 mm | 0.594″ |

5/8″ | 15.875 mm | 0.625″ |

16 mm | 0.63″ | |

21/32″ | 16.6688 mm | 0.656″ |

17 mm | 0.669″ | |

11/16″ | 17.4625 mm | 0.688″ |

18 mm | 0.709″ | |

23/32″ | 18.2563 mm | 0.719″ |

19 mm | 0.748″ | |

3/4″ | 19.05 mm | 0.75″ |

25/32″ | 19.8438 mm | 0.781″ |

20 mm | 0.787″ | |

13/16″ | 20.6375 mm | 0.813″ |

21 mm | 0.827″ | |

27/32″ | 21.4313 mm | 0.844″ |

22 mm | 0.866″ | |

7/8″ | 22.225 mm | 0.875″ |

23 mm | 0.906″ | |

29/32″ | 23.0188 mm | 0.906″ |

15/16″ | 23.8125 mm | 0.938″ |

24 mm | 0.945″ | |

1″ | 25.4 mm | 1″ |

## More Standard to Metric Conversions

You can use our inches to mm conversion calculator to convert SAE measurements to metric. You can also convert these common sizes by using the links below:

## References

- SAE International, https://www.sae.org/