Microsiemens to Siemens Conversion
Enter the electrical conductance in microsiemens below to get the value converted to siemens.
How to Convert Microsiemens to Siemens
To convert a microsiemens measurement to a siemens measurement, divide the electrical conductance by the conversion ratio.
Since one siemens is equal to 1,000,000 microsiemens, you can use this simple formula to convert:
The electrical conductance in siemens is equal to the microsiemens divided by 1,000,000.
Microsiemens and siemens are both units used to measure electrical conductance. Keep reading to learn more about each unit of measure.
The microsiemens is a multiple of the siemens, which is the SI derived unit for electrical conductance. In the metric system, "micro" is the prefix for 10-6. Microsiemens can be abbreviated as μS; for example, 1 microsiemens can be written as 1 μS.
One siemens is the electrical conductance equal to an increase in current of one ampere for every increase in electrical potential difference of one volt. The siemens is the SI defined unit equal to the mho, and is the reciprocal of the resistance in ohms.
The siemens is the SI derived unit for electrical conductance in the metric system. Siemens can be abbreviated as S; for example, 1 siemens can be written as 1 S.
Microsiemens to Siemens Conversion Table
|1 μS||0.000001 S|
|2 μS||0.000002 S|
|3 μS||0.000003 S|
|4 μS||0.000004 S|
|5 μS||0.000005 S|
|6 μS||0.000006 S|
|7 μS||0.000007 S|
|8 μS||0.000008 S|
|9 μS||0.000009 S|
|10 μS||0.00001 S|
|100 μS||0.0001 S|
|1,000 μS||0.001 S|
|10,000 μS||0.01 S|
|100,000 μS||0.1 S|
|1,000,000 μS||1 S|