# Concrete Calculator – Find Yards or Bags Needed for a Slab or Footing

Calculate the yards of concrete or how many pre-mixed bags of concrete are needed to pour a slab, patio, footing, column, or post fill-project, including circular slabs and patios. Estimate the cost of materials if you know the price per yard.

## Calculate Concrete for a Rectangular Slab

Optionally enter the price per cubic yard
\$
*Average is \$115 per yd3, although your price will vary based on the type of concrete, vendor, and location.

## Calculate Concrete for a Circular Slab

Optionally enter the price per cubic yard
\$
*Average is \$115 per yd3, although your price will vary based on the type of concrete, vendor, and location.

## Calculate Concrete for a Footing

Optionally enter the price per cubic yard
\$
*Average is \$115 per yd3, although your price will vary based on the type of concrete, vendor, and location.

## Calculate Concrete for a Circular Column

Optionally enter the price per cubic yard
\$
*Average is \$115 per yd3, although your price will vary based on the type of concrete, vendor, and location.

## Calculate Concrete for a Solid Wall

Optionally enter the price per cubic yard
\$
*Average is \$115 per yd3, although your price will vary based on the type of concrete, vendor, and location.

## How to Estimate Concrete in Yards

Concrete is sold by the cubic yard, or in pre-mixed bags. A cubic yard is just a standard volume, measured in yards.

To calculate a rectangular area, find cubic yardage by multiplying the project width, length, and height in yards. For a circular patio or column, multiply the radius by the radius by 3.14 (πr²) by the height using measurements in yards.

If you aren’t measuring in yards, convert all measurements to yards first using our length conversion calculators.

Get Free Project Estimates

Find Qualified Concrete Professionals in Your Area

### Using a Concrete Calculator

Our calculator can estimate the yards of concrete needed by entering the project dimensions in imperial or metric measurements, including inches, feet, yards, centimeters, or meters. You’ll also get the number of 40-pound, 60-pound, or 80-pound bags of concrete are needed for the project.

For example, a 10′ x 10′ slab that is 4″ thick will need an estimated 1.23 yards3 or 74 60lb bags of concrete and will cost roughly \$100.

### Step by Step Without a Calculator

• Measure the length, width, and height of the slab, footing, or column. If the area is complex or if multiple pours are needed, break the project into smaller pieces and calculate the concrete yardage of each individually. For instance, if you are measuring a slab that is not a rectangle or circle, break it into different sections and measure the yardage of each section first, then add the cubic yards together.

• Convert dimensions to feet if they aren’t in feet. Convert inches to feet, convert yards to feet or convert meters to feet
• Multiply the width times the length times the height (W x L x H). You can also use our volume calculator to find cubic yardage of a space.
• Convert the volume to cubic yardage from cubic feet. To do so, divide the cubic footage by 27 to get the cubic yardage.
• Round up to the nearest yard as most suppliers will likely not sell fractions of a yard. It is worthwhile to ask your supplier if they will sell a partial yard of material, but the most do not.
• Estimate how many pre-mixed bags needed for smaller projects. For smaller projects, it may not be practical to order a truckload of concrete and pre-mixed bags make the most sense. You can purchase bags of concrete from your local home center.

Refer to table below that shows the coverage of different sizes of pre-mix bags. On average it will take 90x 40 lb bags, 60x 60 lb bags, or 45x 80 lb bags to fill one cubic yard of concrete.

• Add 5%-10% additional material to account for settling, spillage, and waste. This will ensure you can complete your project in a single pour without needing to get more concrete to complete the project if you’re short.

### Formulas for Calculating Concrete in Yards

#### Square and Rectangular Areas

volume = width × length × height
yds3 = width yds × length yds × height yds
yds3 = (width ft × length ft × height ft) / 27

Use our rectangular slab, footing, or poured wall concrete calculators.

#### Circular and Cylindrical Areas

volume = π × radius2 × height
yds3 = π × radius yds × radius yds × height yds
yds3 = (π × radius ft × radius ft × height ft) / 27
π = 3.14159265359

Use our circular slab or column concrete calculators.

#### Steps

Divide the steps into rectangles, then find the volume for each rectangle/cube. Add the volume for each rectangle to find the total volume.

volume = width × length × height
yds3 = width yds × length yds × height yds

Use our concrete steps calculator to easily estimate material for steps.

For more complex shapes see our volume calculator.

## How Many Pre-mix Bags of Concrete do you Need?

If your project is small, you can use pre-mixed bags of concrete. Bags come in 40-pound, 60-pound, or 80-pound bags. Mixing bags on-site can become difficult if you’re pouring a large slab or have many footings.

Using concrete bags can be easier when you have many small pours or a small project where a truck is not practical or cost-effective. For the most part, ready-mix concrete from a truck is more cost-effective than bags and makes sense if you have a mid-size project and can pour all at once.

Calculating bags is a little less straight forward since each bag size will fill different volumes. Check the bag you’re using to find the exact fill-rate for the product. The table below shows the average fill for various pre-mix bag sizes.

This table shows the number of pre-bags of concrete needed to fill a volume measured in cubic yards.
Bag Size Pre-mix Bags Needed to Fill
1/4 cu yd 1/2 cu yd 3/4 cu yd 1 cu yd
40 lb bags 23 45 68 90
60 lb bags 15 30 45 60
80 lb bags 12 23 34 45

## How to Estimate Concrete Installation Cost

Ready-mix concrete typically costs around \$115 per cubic yard, and pre-mix bags usually range from \$2.50 to \$7.

 ready-mix: \$115 per cu yd pre-mix 40 lb bags: \$2.50 – \$5 per bag pre-mix 60 lb bags: \$3 – \$6 per bag pre-mix 80 lb bags: \$4.50 – \$7 per bag

The average cost to install a concrete slab is \$6 – \$16 per square foot. In addition to the cost of the concrete itself, there are also labor costs for preparing the area, the pour, and the finish.

A standard brush finish will likely be on the low end of the price range, while a decorative finish with coloring will be on the high end of the range. Consider getting a professional concrete installation estimate from contractors in your area for a more accurate cost estimate.

## Preparing to Pour Concrete

Much of the work to pour concrete is done before the truck even arrives at the project. The site must be measured and laid out. Forms must be installed to create the edges of a slab or contain a footing. Rebar should be installed to reinforce the concrete and to prevent cracking in the future.

Use our rebar material calculator to estimate the amount of rebar needed for your project. Make sure the installation team is ready for the installation and able to begin as soon as the truck arrives to avoid having it set up before the project can be completed and minimize idle time.

## Tips For Ordering Concrete

Call your concrete supplier and ask them to advise you on the proper mix given your application and region. They should be able tell you what will work best to support the strength requirements and freeze/thaw cycles in your region.